On September 12, 2016, People's Online published a news from Ningde Evening News that foam was used for the exterior wall decoration materials on the 12th and 15th floors of Building 148#, Sansheng Haide Park, Ningde, Fujian, and the community owners were worried about the potential safety hazards.
The foam mentioned by the owner is actually EPS finished lines, which is also a relatively mature process at present. In addition, the outer wall decorative lines only use EPS lines for the outer 10 cm, and the material used on the inner side is also concrete, which does not affect the family's living and there will be no safety hazards.
The construction industry section of the local Dongqiao Construction Bureau also passed on-site survey and verification, and the drawings and construction were in compliance with relevant regulations.
EPS decorative line is actually a new type of exterior wall decorative line and components. The main body is EPS (plastic foam), the outer layer is pasted with alkali-resistant glass fiber mesh cloth, and a special bonding outer protective layer is compounded. EPS lines are more suitable for installation on external walls with EPS and XPS insulation. The installation of cement components is very difficult, the construction period is long, cracks will appear over time, and the durability is poor. However, the use of EPS decorative lines has easy installation, economy and long durability. With the continuous development of the building decoration industry, more and more new materials continue to come to the fore. EPS lines are the object of more and more people's favor. They are not affected by temperature changes, are resistant to cold and heat; and are not affected by humidity. The influence of weather and acid rain. EPS decorative lines can be fireproof and will not emit toxic substances. It is an environmentally friendly high-quality decorative building material product. EPS decorative lines are cut by computer numerical control, which can be produced quickly and have a wide variety of models, such as lines, Roman columns, window sleeves, bucket arches, etc., which can be installed on the four sides of the window, door edges, eaves corners and walls; make the building's facade It is more beautiful and brings new and different creativity to architects.
