Method 1. Use high-concentration thinner---water to clean, but the material cannot be painted on the surface, or the color of the paint will be brushed off along with it. Use a small spatula used to paint the wall and cement to talk about the layer that is attached to the surface of the glue. Scrape off the foam. Don’t worry about scratching. Then use an oil brush dipped in water on the glue after the foam is brushed to corrode for a while.
The foam partition board can be used as a bedroom, because the poly particles inside have the effects of sound insulation, heat insulation, frost resistance, etc., and the calcium silica board on both sides has a fireproof effect, so it is very suitable for the bedroom. Remember not to use hollow ones, hollow ones do not bear weight
This is a foam-blocked mobile toilet, which is environmentally friendly and energy-saving! The working principle of the foam-blocking mobile toilet: The working principle of the foam-blocking toilet is to use the foam produced by the foaming liquid mixture to replace the toilet flushing. When in use, there is a foam channel on the side wall of the toilet, and the compressed air of the foam toilet Compressed air delivery pipe to the foam stimulator, so that the foam from the foam box covers the inside of the toilet through the foam channel without odor, using foam instead of water for flushing toilets
It includes a stainless steel squatting pan, a control box composed of an electric control device, a liquid supplement device and a compressed air delivery device. The lower part of the stainless steel squatting pan is fixedly connected with a foam box containing the stainless steel squatting pan. The foam box and the control box pass through The compressed air delivery pipe, the refill pipe and the signal transmission line are respectively connected with the compressed air delivery device, the refill device and the electric control device of the control box. The side wall of the stainless steel squatting pan is provided with a foam channel. There is a foam stimulator and a liquid level controller in the foam box. The upper part of the stainless steel squatting toilet is equipped with a defoaming device. When in use, the compressed air of the foam toilet passes through the compressed air delivery pipe to the foam stimulator, so that the foam from the foam box covers the inside of the toilet through the foam channel without odor. The defoaming device can be used Easily eliminate the foam above the upper end of the toilet. The invention has the functions of compact structure, high efficiency, water and electricity saving.